QQ:122567712
msn:myprotein0007@hotmail.com
敝人专著《大话存储》终于出版了!2008年10月中旬全面上市!
请问scsi有大于32位总线的么?为何例子中可以接38块磁盘?
查看( 1288 ) /
评论( 12 )
TAG:
-
rechardluo
发布于2007-10-26 20:07:50
-
把SCSI-ID 和 Target ID好好捋捋,也许对于这个问题有帮助!
-
冬瓜头
发布于2007-10-26 21:35:17
-
4.1.7 Device Addressin
g
The number of devices that may be addressed depends on the width of the data path on the bus; an 8-bit
data path allows up to 8 devices to be addressed, a 16-bit data path allows up to 16 devices to be
addressed, and a 32-bit data path allows up to 32 devices to be addressed. However, the number of
devices that may be connected to the bus is dependent on several factors (e.g., bus length, data transfer
rates, capacitance loading of the SCSI device) that are described throughout this standard.
spi2r20b,不知道是否可以接大于32个设备?请罗兄明示,谢谢了
-
killy1980
发布于2007-10-28 23:20:30
-
冬哥,我不会回答,路过一下!
-
billyang1983发布于2007-10-28 23:41:43
-
见帖子
http://www.storren.net/bbs/read.php?tid=269
已经讲的非常详细了。
-
冬瓜头
发布于2007-10-29 08:26:04
-
谢谢楼上这位兄弟,但是蓝冰大侠没有提到为何一条总线上可以连接38个target id呢?他自己说的是16个的,貌似他的意思就是最大16个吧?
-
rechardluo
发布于2007-10-29 10:58:35
-
拿Linux来说把,主机上的HBA卡限制了最大的TID和最大的LUN数目,
当然特定的卡就有特定的数值(缺省的TID为8,每个TID下的LUN为1个),比如对于8bit宽度最大的ID为8,16位为16,而FC型的HBA为128或者256;
其中每个target的LUN最大数目还是可调的tunable。
LZ最好把得到输出的top结构看看,可能会有更好的理解这个问题!
-
冬瓜头
发布于2007-10-29 11:19:52
-
拓扑结构是两台jbod级联到一台jbod上,然后通过一条线缆连接到主机hba上。
朋友帮忙试验的,拓扑他说就是这样。
另外,其中两台各有15块盘,另一台8块盘。所以一共38块。
阵列卡是adaptec的8通道 adaptec 3085。
[ 本帖最后由 冬瓜头 于 2007-10-29 11:33 编辑 ]
-
rechardluo
发布于2007-10-29 12:16:35
-
3085是支持SATA和SAS接口的,不再是传统的并行SCSI接口,所以8位和16位宽的限制影响不大。
BTW,SAS是支持交换架构的!
-
冬瓜头
发布于2007-10-29 12:48:32
-
但是他说是scsi接口和硬盘。txt中第一行也表明了“scsi4”
我记得从某些资料中看过,sas那个hub,好像是个hub,不是switch。这些hub可以级联。
-
冬瓜头
发布于2007-10-29 12:51:08
-
刚刚查了一下,这卡确实不支持scsi盘。
被忽悠了。太惨了。
-
zlz1zlz
发布于2007-10-29 16:14:41
-
QUOTE:
原帖由 冬瓜头 于 2007-10-29 12:51 发表

刚刚查了一下,这卡确实不支持scsi盘。
被忽悠了。太惨了。

-
saintdragon发布于2007-10-30 14:19:09
-
冬瓜这次被黑了一把

标题搜索
我的存档
数据统计
- 访问量: 25780
- 日志数: 166
- 图片数: 10
- 建立时间: 2006-12-26
- 更新时间: 2008-10-12
